The data is part of a study published in: Reijonen, J., Revuelta, A., Metsä-Kortelainen, S., Salminen, A. Effect of hard and soft re-coater blade on porosity and processability of thin walls and overhangs in laser powder bed fusion additive manufacturing. Int J Adv Manuf Technol (2023). https://doi.org/10.1007/s00170-023-12853-5 . Please refer to this article for all the experimental details; how the data was acquired, processed, and used. For any re-use of the data, please cite the original publication. The speciments are as follows [ID, blade type, features, orientation]: Ajo461_1, soft blade, thin walls, 0 deg, Ajo461_2, soft blade, overhangs, 90 deg, Ajo461_3, soft blade, thin walls, 90 deg, Ajo461_4, soft blade, thin walls, 45 deg, Ajo461_5 soft blade, overhangs, 0 deg, Ajo463_1, hard blade, thin walls, 0 deg, Ajo463_2, hard blade, overhangs, 90 deg, Ajo463_3, hard blade, thin walls, 90 deg, Ajo463_4, hard blade, thin walls, 45 deg, Ajo463_5, hard blade, overhangs, 0 deg Preview dataset found at https://doi.org/10.23729/7325c282-83d7-433a-be65-a905faa81d03 . To obtain data, please contact fairdata-pas@gtk.fi .

2023